ridin_low07
New member
- Joined
- Mar 28, 2014
- Messages
- 20
- Reaction score
- 0
I have been thinking it about it most all day today. Does anyone think it would be possible to program a Switchblade on a 1st gen Nox? I think it would be kinda neat.
Switchblade Key for a 1st Gen?
- Thread starter ridin_low07
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
TheDarkKnightKnox
New member
The switchblade "key" has more of a square look to it and would most likely require a new tumbler as well. I'm not sure of the implications if the PassLock systems would be compatible either.
My Old 1st gen nox had a horrible problem chewing up keys changing the tumbler was not fun lol either is getting a new key from the dealer.
My Old 1st gen nox had a horrible problem chewing up keys changing the tumbler was not fun lol either is getting a new key from the dealer.
ridin_low07
New member
- Joined
- Mar 28, 2014
- Messages
- 20
- Reaction score
- 0
I have saw some folks just switch the guts of the key over, ie the transponder chip. Also they would pull the guts out of the keyfob and swap em over. I just cant find a switchblade with correct button set up or else I would order one and give it a try.
