A/C

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

prheaume

New member
Joined
Nov 3, 2011
Messages
572
Reaction score
0
Location
Sherbrooke,Qc
Have you notice on OBS NOX that the A/C blower don't go on a regular speed? Mine is always at the same speed but when you listen to it, you can ear it change is speed. Am I the only one ?
 

Z_Ghost

Super Mod
Joined
Nov 7, 2010
Messages
1,586
Reaction score
1
Location
Texas
My blower stays at what speed I set it to unless I have it on auto, then it will change to keep the temp were I have it set.
 

prheaume

New member
Joined
Nov 3, 2011
Messages
572
Reaction score
0
Location
Sherbrooke,Qc
Ok, on my LS I don't have the auto. But you can clearly ear the blower going faster than comeback to the speed setted. Don't what can cause that. RPM?
 

dietz4ibanez

Admin
Joined
Jun 23, 2010
Messages
4,672
Reaction score
7
Location
North Carolina
Ok, on my LS I don't have the auto. But you can clearly ear the blower going faster than comeback to the speed setted. Don't what can cause that. RPM?

Yes, RPM will change that. You will notice the affects on a hot summer day. If you have cold ac blowing and floor it, the fan speed and cold air will be affected!
 

debbyb71

New member
Joined
Oct 15, 2015
Messages
9
Reaction score
0
Mom has an '06 and asked me why when she turns the dial that determines the speed the air comes out nothing happens whether the other dial is on ac or heat
Any ideas?
Sorry to butt in here but was the closest post I could find about ac.

Sent from my XT1056 using Tapatalk
 

dietz4ibanez

Admin
Joined
Jun 23, 2010
Messages
4,672
Reaction score
7
Location
North Carolina
Mom has an '06 and asked me why when she turns the dial that determines the speed the air comes out nothing happens whether the other dial is on ac or heat
Any ideas?
Sorry to butt in here but was the closest post I could find about ac.

Sent from my XT1056 using Tapatalk

I guess if you have it blowing on the floor or defrost, you wouldn't notice a difference as you would if it was blowing straight at you.
 

debbyb71

New member
Joined
Oct 15, 2015
Messages
9
Reaction score
0
Ended up having to replace resistor - it was all melted.
 

debbyb71

New member
Joined
Oct 15, 2015
Messages
9
Reaction score
0
f1add813fa3252fc2eb1d75b835963d6.jpg
 

Members online

Top