Search results

Welcome to the site! Glad you found us! Sorry for the slow responses. Is this the 'Nox in question, here? If so, I'm running 275/45/20's all the way around. They are 11.5" wide! ~Brian

I can't remember but I think there was a long plastic clip that went under the back of the seat. Did you ever figure it out?

Yes, I bow hunt more than anything myself. I haven't had time for fishing lately and if I do go it's been bow-fishing, at night.

Is it touching the tire at any time?

Here is a build of the drivers seat, don't know if it will help you.

I don't know if this would be helpful but #17 is your factory heated membrane and I assume it's where you would want to slip the aftermarker one.

This might be of some help. If the fuse is good, I would start be removing the finish panel. You might have to pull the plastic part of the knob off.

Before replacing the switch, I would check to make sure I didn't have a blown fuse.

I don't think anyone on here has done this on this site that I know of but that wouldn't stop me from doing it if I wanted to.

Congrats on the new ride and Welcome to the site! I have a 2010 v6 to with 107k miles. it's been a great vehicle. I recently did sparkplugs on mine with direct OEM replacements and since i removed the intake to do so, I replaced the upper/lower and intake gaskets. I am thinking about...

I would be looking into spark plugs and wires first, personally. There may not be a engine code but there might be a pending misfire code. The ecm will do all it can to through fuel and air properties into the engine to keep it running right. Sometimes when a vehicle isn't running right, it...

I see. I can't really tell from the photo but maybe it would be nice for you to see these photos. Hopefully it helps in some way.

Welcome to the site! My Dad is still rocking his 2000 Malibu with over 250k miles, she's still getting 28-32 mpgs! Post some pictures when you get a chance! I also have a 2007 Malibu that I bought for $600!

Check this thread out, James! http://www.chevyequinoxforum.com/f10/i-broke-lumbar-%2Aupdate%2A-fixed-see-post-9-a-498/ Welcome to the site!

Welcome to the site! Post up some pictures when you get a chance.

My first bet would have been with the fuse. Another thing that comes to mind is there was a recall on the climate control unit where all the buttons are for the power seats. I would call the dealer to see if this might be a issue or if there is a recall for your vehicle. I don't know how...

I've heard that this has been a issue. My thinking is that they are doing this from the factory to coerce people to buy the navigation through onstair. I don't have any facts on this or will they admit to this being factual if it were true. Does the map from your phone show up on the screen...

Welcome to the site, BTW!

Ours has 105k on the factory Catalytic Converter. Have you had the vehicle tuned up? I would be interested to know if you have had the plugs changed at any point. I mean, I normally change those Ac Delco plugs and if your vehicle was services with a junky spark plug or not at all. I fouled...

Could be but my first step would be to put a voltmeter on the battery terminals with the engine off and then again with it running just to be sure that the alternator is charging the battery. Those batteries are setup to crank multiple times without a charge.