Hi, I've recently purchased a 2005 Equinox with the 3.4. The engine had coolant in the crankcase and thus, spun a bearing. So I went out and got another engine. Not expecting a salvage yard to mess up this order, I got the engine, prepped it, swapped over what needed swapped and dropped the next motor in. Everything was going swimmingly until I went to start it. No spark. No crank/cam sensor pulse showing on my maximus. Called and checked what year it came out of and surprise! It came from an 07. Aside from obviously pulling the motor back out, what are my options for getting this suckered to start?
Thanks in advance.
Thanks in advance.
