Reset reverse tilt mirrors

[Blues#1fan]

Hello, I had to replace the driverside side mirror due to no mirror defrost function. After new install of replacement mirror I put car in reverse the mirror tilts but runs all the way down till the motor bottoms out, and when I put the car in drive the mirror motor makes a sound like it wants to come up but it doesn't. I was wondering if there is a certain way to reprogram the mirror to the front seat. (When I hit the 1, or 2 on the seat the mirror moves)

 

[sdhow]

Bump. No one replied to this. I have a similar issue. Removed the door panel and replaced. Now neither mirror works via the switch, but both mirrors tilt down in the reverse mode. They worked perfectly prior to removing and unplugging the door panel.

 

[ricklack]

I don't have this feature, but wonder if there is a setting or calibration procedure?

 

[sdhow]

Actually, I figured it out. The reversing memory mirrors require a different switch than the non-reversing ones. And I think there's a control box screwed inside the door panel. I had replaced the damaged door panel with a new one and, although it looked the same as the one for my LTZ, I think this one was made for a 2LT.