timr847
New member
- Joined
- Aug 3, 2022
- Messages
- 17
- Reaction score
- 3
Hey guys newbie here
I need some help with valve springs. I'm working on daughters 2013 equinox 2.4 Ecotec. Removed cylinder head(replacing valves) removed springs and soaked because of mass carbon/oil build up. I assumed the springs were all same size so I put Alli of then into a pile but after cleaning them I'm see markings on some of them (gold paint?) Some are marked with two or three paint(?)marks, then I decided to measured them. I have 4@ 1.6580. 4@ 1.6675 and 8@ 1.6755 ? Are they messed up or do they go in a certain order to the cylinders ? I'm looking all over on web and can't find anything about this??
Any help is greatly appreciated.
Tim
I need some help with valve springs. I'm working on daughters 2013 equinox 2.4 Ecotec. Removed cylinder head(replacing valves) removed springs and soaked because of mass carbon/oil build up. I assumed the springs were all same size so I put Alli of then into a pile but after cleaning them I'm see markings on some of them (gold paint?) Some are marked with two or three paint(?)marks, then I decided to measured them. I have 4@ 1.6580. 4@ 1.6675 and 8@ 1.6755 ? Are they messed up or do they go in a certain order to the cylinders ? I'm looking all over on web and can't find anything about this??
Any help is greatly appreciated.
Tim
