Ac and fan speed issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

cavell

Active member
Joined
Aug 26, 2018
Messages
198
Reaction score
40
05 equinox. Ac works fine at fan speed 1and 2. At speed 3 the ac light goes off but fan still runs. I think fan runs at 4 also. I thought a blower resistor issue would cause fan to not run at all speeds? I figure a new blower motor resistor is where to start?
 
Last edited:

jowolfe

New member
Joined
Aug 11, 2024
Messages
1
Reaction score
1
I solved my issue by replacing the blower motor and resistor. Look at both parts. If your notice a rust color, check your the drain plug on the back of your firewall. Mine was plugged up causing water to leak on to those components.
 

cavell

Active member
Joined
Aug 26, 2018
Messages
198
Reaction score
40
Did you change any part of the wire harness? I did have a bad resistor yrs ago where the fan would not work at #3. But my fan seems fine at #3 but no ac.
 

Members online

No members online now.
Top