I have a 2012 2.4L that has a MAF code that I can not track down the problem to it. I have replaced the MAF sensor, pig tail, checked wiring and what fuses I thought went to the system. I have had it started and running and unplugged the MAF sensor and got no change. I have also watched it on live data on a scanner and it reads 0 99.99% of the time but sometimes it will show a reading and then just go back to 0. Is there anything anyone can think of to check other than maybe the ECM. Do these have ground wire issues or other wiring issues that could be causing the problem. Thanks for any and all help
2012 Equinox 2.4L MAF No Signal help needed
- Thread starter emzornes
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
