Reply to thread

Message: <blockquote data-quote="eden610" data-source="post: 20962" data-attributes="member: 7567">I bought a Cloyes kit 9-4201SAVVT1. chain, guides, crankshaft gear, spay oiler, 2 actuators phasers, tensioner and 2 solenoids. The old guides were intact, no broken pieces. installed all new pieces per service manual and a boat load of videos.tapped the tensioner, saw the chain get snug and rotated the crank 3 or four time and it seems fine with no resistance. even shined flashlight on chain as my son rotated engine, could not see anything touching the chain.I did this whole procedure twice with no luck getting rid of noise. drove it about 20miles and the engine runs fine. just the grinding/squawking noise like something is rubbing. when i first crank it cold there is no noise, as the engine warms up it shows. maybe a bad phaser right out of the box??</blockquote>