Reply to thread

Message: <blockquote data-quote="Bpopilek" data-source="post: 18316" data-attributes="member: 6174">I figured out the problem and thought I would at least share my results in case someone else runs into the same issue. Looking at the schematic a little further this evening revealed that there is a GRN/YEL wire that communicates with both the driver door power window as well as the door ajar sensor. Checking this wire out further revealed that I was not getting continuity through from end to end. As a test, I jumpered both sides of this wire with a new piece that I spliced in. Instantly, everything came back to life and now I am having no issues. I'm not sure how this individual wire could be the only one that was damaged, but hopefully its not a sign of things to come in the future. I'm attaching a screenshot from Alldata that shows the circuit I'm talking about. [ATTACH=full]1797[/ATTACH]</blockquote>