Reply to thread

Message: <blockquote data-quote="EppyGA" data-source="post: 20117" data-attributes="member: 7064"><p>The video I posted is well done and details a very thorough process to drain, flush and refill. A couple of things I would add. I found I could easily access the fill plug by unclipping the computer module and swinging it out of the way temporarily and then putting it back.  There are two clips at the top of the module that hold it in place.  I also found a jiffy-tite tool on Amazon that was small and worked to get the cooler line loose. I did not need to open the clamp that holds to two lines together to get the line loose and out of the way.  I did not spend the money to buy his Amsoil fluid.</p></blockquote><p></p>