Reply to thread

Message: <blockquote data-quote="PoManNox" data-source="post: 22600" data-attributes="member: 8300"><p>Old thread here, but what I did today was remove the three 10mm bolts from the heat shield, which allowed me to shift the shield to the right and wedge it there with a piece of wood.   I was then able to shove a section of clear vinyl ~3/8" tubing into the fill hole.  I shoved the tubing onto my squeeze bag of Valvoline synthetic 75w90 and was easily able to get it filled that way until oil started to dribble out the fill plug.</p></blockquote><p></p>