Reply to thread

Message

<blockquote data-quote="ZIGGZ 2012 Equinox" data-source="post: 13539" data-attributes="member: 2097">Its a simple wireCut off the lighter side of the radar and expose the two wires on the radar strip&nbsp; and back the wires one will be black - the other red + now you need to find a system that is on when you driving and off when your out of the car (off) the easy way is to plug the lighter in before you exposed the wire and if it turns off when you exit the vehicle use the wires behind the 12V lighter wires. Just splice the red to red and black to black. Personally I would use a soldering gun and shrink wrap with a heat gun. just find a way to tie the wires together so they are safely secured electrically together and make 100% there is no exposed wires any where. Secure,secure.&nbsp; The easiest way is a blue crimp where you put the crimp over the 12V wire on the 12v that runs straight through and put your red wire to that goes just half way through and crimp it down tight and do the same with the black. I hope this helps Im here to help if you need help. Take care and I wish you luck.</blockquote>

[QUOTE="ZIGGZ 2012 Equinox, post: 13539, member: 2097"] [b]Its a simple wire[/b] Cut off the lighter side of the radar and expose the two wires on the radar strip and back the wires one will be black - the other red + now you need to find a system that is on when you driving and off when your out of the car (off) the easy way is to plug the lighter in before you exposed the wire and if it turns off when you exit the vehicle use the wires behind the 12V lighter wires. Just splice the red to red and black to black. Personally I would use a soldering gun and shrink wrap with a heat gun. just find a way to tie the wires together so they are safely secured electrically together and make 100% there is no exposed wires any where. Secure,secure. The easiest way is a blue crimp where you put the crimp over the 12V wire on the 12v that runs straight through and put your red wire to that goes just half way through and crimp it down tight and do the same with the black. I hope this helps Im here to help if you need help. Take care and I wish you luck. [/QUOTE]

Verification